Applicable standards |
Measurement function |
General-Purpose Sound Level Meter according to Measurement Law IEC 61672-1:2002 Class2 IEC 60651:1979 Type2 IEC 60804:2000 Type2 JIS C 1502:1990? |
Sound level Lp,maximum sound level Lmax, equivalent continuous sound level Leq,sound exposure level LE |
Measurement time: 10minutes, 1hour (stop at any time possible) Measurement level range : A-weighting: 30 -137dB, C-weighting: 3 6-137dB Inherent noise: A-weighting: max. 24dB, C-weighting: max. 30dB Reference sound pressure level: 94dB Reference frequency: 1,000Hz Reference range: 130dB (no range selection necessary) Frequency range: 20 - 8,000Hz Frequency weighting characteristics: A and C Time weighting characteristics: rms detection performed with digital processing |
Precessing: Sampling cycle 20.8§Á ( Lmax, Leq, LE) Acoustic Calibration: Using sound level calibrator NC-74 Microphone:1/2inch electret condenser microphone |
Dynamic characteristics: Fast(F) and Slow(S) |
Model: UC-52 Sensitivity level: -33dB (0dB=1V/Pa) |
Display: LCD |
Output: DC output |
Numeric readout: Resolution 0.1dB, update frequency 1s Bar graph display: Resolution 5dB, scale 100dB, update frequency 0.1s Warning indicators: ¡°Over¡±(overload) when upper scale limit is exceeded by more than +7dB ¡°Under¡±(underload) when lower scale limit is exceeded by less than -0.5dB Battery voltage: 3-stage indication of battery capacity |
Output voltage: 2.5V (at 130dB), 0.25V/10dB Output impedance: Approx. 50ohms Load impedance: 10k-ohms or more |
Power requirements: IEC R6P (size AA) battery: X2 |
Ambient temperature range for operation: |
Battery life: Approx. 20hours continuous operation with LR6 batteries (at 25¡É) Approx. 7hours continous operation with R6P batteries (at 25¡É) (Battery life is 20% shorter when DC output is used or during Cal On) |
-10 to +50¡É, 10-90% RH(no condensation) |
Dimensions, weight: |
Supplied accessories: |
Approx. 227X78X31mm, approx. 240g(including batteries) |
Windscreen WS-10 IEC R6P (size AA) batteries (Manganese) Miniature screwdriver Carrying case Hand strap |
Optional accessories: |
|
DC voltage output cable CC-26 Sound calibrator NC-74 |