Specification:

Measuring ranges: oxygen concentration: 0.00 to 100% O2

Temperature: -20.0..50.0°C

Accuracy(at nominal temperature 25°C): oxygen: +0,1% + 1 digit

Temperature: +0,1°C + 1digit

Output signal (only O2): 4-20mA (2-wire - standard)

0-10V (3-wire - option)

electric isolation: input electrically isolated

auxiliary energy: 12..30 V DC (at output 4-20mA)

18..30 V DC (at output 0-10V - Option)

Perm. impedance: (at 4-20mA): RA[Ohm]= UV[V]-12V /0,02A

Perm. load: (at 0-10V): RL>3000 Ohm

working temperature: 0 to 50°C

storage temperature: -20..70°C

Relative humidity: 0 to 95% r. F.

Reverse voltage protection: 50V permanently

Display: approx. 10mm high, 4-digit LCD

Housing: ABS (IP65 - with the exception of sensor plug)

Dimensions: 82x80x55mm (without elbow type plug and sensor plug)

electric connection: elbow-type plug acc. to DIN 43650 (IP 65), max. wire coross section: 1.5mm², wire diameter from 4.5 to 7mm

Sensor connection: 5pin jack connector, screwable

Calibration: 1-point calibration: extremely simple quick calibration in atmospheric air

Air pressure compensation: 500..2000hPa, manually input

Compensation of the dipendence of the O2-concentration and the air pressure

Specification sensor GGO369 S/MU:

Sensor: oxygen sensor GGO369 S/MU

Sensor element: Integrated in housing, exchangeable. Suitable for air resp. high CO2-concentrations

Connection cable: 95% in 10sec., depends on temperature

Operating life: Warranty for sensor element: 18 month (assuming appropriate usage according to the manual)

Operating pressure: 500 bis 2000hPa (static). For air- and gasstream use the oxygen sensor GOO 369/MU

working temperature: -5 to +50°C (sensor)

rel. Humidity: 0 to +95% r. H. (non-condensing)

Dimensions of housing: d=approx. 40mm, housing with M16X1-screw thread (sensor can be connected to line tubes by means of an included adapter piece)

length: approx. 103mm (153mm incl. anti-buckling glanding)

Weight: approx. 155g

connecting cable: approx. 1.3m, with 5pin plug, screwable

working temperature: -5 to 50°C (sensor)

storage temperature: -15 to +60°C

Options an spare parts (against upcharge):

AV010: output signal 0-10V

GOO: oxygen sensor GOO369S/MU, open sensor type, suitable for air and gas-stream

GOEL369S spare sensor element

Air oxygen measuring transducer incl. oxygen sensor GGO 369S, basic price

 Please order following accessories separately: